ADDER ADDERView RDX 5000IP Betriebsanweisung PDF herunterladen (Seite 6)

 







Connecting the rack drawer

All server, network and power connections are located at the rear of the unit.

The EXTernal link (network or remote user)

The single RJ-45 socket labelled as EXT is used to allow either global or remote

users to login and control connected servers. The EXT port provides one of the

following links (dependant on the model of rack drawer):

• Anethernetnetworklink,labelled ,

• Aremoteextenderlink(toattachanAdderX200),labelled

KVM

only

. Note: This

port is NOT a network port.

To connect the external link

1 Wherever possible, ensure that power is disconnected from the rack drawer.

2 Connect a CAT 5, 5e or 6 link cable to the port labelled EXT:

Link cable from either a network

connection or a remote extender

EXT

3 Connect the other end of the cable as follows:

• IftheEXTportlabelshows connect the link cable to a network

switch/router.

• IftheEXTportlabelshows

KVM

only

connect the link cable to an Adder

X200unit.

Computer access module links

There are sixteen RJ-45 sockets labelled as COMPUTER CONNECTIONS on the

rear panel. Each socket supports a CAT 5, 5e or 6 link to an individual server

system.

Note: The maximum length of the CAM cable can be up to 10 metres (32 feet).

For models RD1716, and RD1916, also ensure that the overall distance between

a remote user (connected to a remote extender) and any CAM unit/server does

not exceed 300 metres (980 feet).

1 Wherever possible, ensure that power is disconnected from the rack drawer.

2 Connect a CAT 5, 5e or 6 link cable to one

of the COMPUTER CONNECTIONS ports:

4 3 2 1

8 7

COMPUTER CONNECTIONS

Link cable to a Computer

Access Module

3 Connect the other end of the cable to the Computer Access Module (CAM)

that is linked to the required server system.

For more information about connecting CAMs, please refer to the

appropriate Adder user guide as appropriate to the rack drawer model being

used:

• RDxx16yy --->useAdderView CATx 1000 user guide,

• RDxx16IPyy --->useAdderView CATxIP 1000 user guide,

• RDxx16QIPyy --->useAdderView CATxIP 5000 user guide.

where: xx is either 17 or 19, denoting the LCD screen size

yy is the country code, e.g. UK, US, etc.

4 Repeat steps 2 and 3 for each server system.

1 2 3 4 5 6 7 8 9 10 11 ... 14 15

Kommentare zu diesen Handbüchern

Keine Kommentare

ADDER ADDERView RDX 5000IP Betriebsanweisung Seite 6

Kommentare zu diesen Handbüchern